Bailiff Enterprises, Inc.
Tank Applications
  Brine Tanks
  Car Wash Tank
  Chemical Storage Tank
  Citric Acid Storage Tanks
  DEF Tanks
  Double Wall Tanks
  Fire Water Tank
  Holding Tank
  Industrial Storage Tank
  Nylon Tanks
  Plastic Water Tanks
  Polypropylene Tanks
  Pressure Washer Tanks
  PVDF "Kynar" Tanks
  Secondary Containment Tank
  Sodium Hypochlorite Storage
  Sulfuric Acid Tank
  Transfer Tanks
  Water Tanks
  Download Bailiff Price List
  About Us
  Privacy Policy
  Tank Installation Guidelines
  Fraction-Decimal Chart
  Gauge-Decimal Chart
  Poly Tank Repair
Other Services
  Custom Roto Molding
  Roto Lining
  Custom Fabrication
Home Page Contact Us Frequently Asked Questions
Industrial Double Wall Tanks

Double Wall Tanks are an excellent containment solution. These tanks have an inner primary storage tank and and an outer secondary tank that encloses the bottom and sidewalls (part or all) of the primary tank.  Our double wall construction is completely sealed so that dust, rain and snow cannot collect in the outer containment tank. 

We have tanks with up to 10,000 gallons of primary storage and we will soon offer 12,000 gallon and 15,000 double wall tanks.  We can provide double wall tanks that are rated to either 1.5 or 1.9 specific gravity.  We outfit our tanks with the fittings that you need, where you need them. 
We offer tanks as small as 25 gallons. Our smaller double wall tanks are ideal for "Day" tank systems.   By combining our rotational molding capabilities with our plastic fabrication and welding, we are able to offer you an extremely wide variety of double wall tanks.
We also offer some double wall tanks from a variety of resins.  We offer all of our double walled tanks in HDPE (high density polyethylene).  We additionally offer many of our double wall tanks in Crosslink Polyethylene, Polypropylen, PVDF (Kynar) and Nylon 6.  In some cases, we can offer double wall tanks with different plastic resins for the inner tank and the outer tank.

Our double wall tank fittings are installed per your specifications.  We strongly urge that all fittings be placed on the top of the tank and that there are no sidewall penetrations.  The most popular fittings for double wall tanks include a level gauge (so you can see how much liquid is in the primary storage tank), a top-fill line equipped with a siphon tube (so liquid can be pumped into or out of the primary tank), and, a screened U-vent (to keep from forming a vaccuum in the tank). OSHA ladders are another popular choice.  We can equip the double wall tanks with flanges or threaded fittings

We normally have the primary and secondary tanks in stock for our double wall tanks. We mate them, weld them together and outfit them per you specifications.  Lead time will vary depending on the size of the tank, fittings required and current shop load.

Take a look at our selection of double wall tanks.  If you need something not listed, please contact us via e-mail or telephone.

Vertical Tanks
Double Wall Tanks
Double Wall Storage Tank
Horizontal Tanks
Horzontal Leg Tanks
Containment Tanks
Containment Basins
Rectangular Tanks
Rectangular Tank
Open Top Tanks
Open Top Tanks
Cone Bottom Tanks
Open Top Cone Bottom Polypropylene Tank
PCO Storage Tanks
PCO Tank
Pickup Truck Tanks
Pickup truck tank
Water Tanks
Water Tanks
PVDF "Kynar" Tanks
Polypropylene Tanks Nylon
Copyright 2013.
All rights reserved.
Tank Accessories
Pipe Fittings
Bulkheads-Installed Sight Gauges Bulkheads
Fire Department Connections Siphon Tubes Cam Lock Fittings
Fabrication Strainers Quick Connect Fittings
Heat Tracing Tank Stands  
Insulation Tie-Down Cables  
Lids & Caps Top Fill Line  
Mixing Eductors Vents  
Sanitary Fittings Welded Couplings  
Screw On Fittings Welded Flanges